The natural choice for green funeral products

Scattering Tube Assembly and Usage Instructions

remove lid

1. Remove lid from urn by twisting gently.

remove inner tube

2. Remove inner (white) tube by twisting gently and place on a flat surface with the open end facing upwards.

3. Slowly fill the white tube with cremated remains (using a funnel if required).

glue inside of outer tube

4. Squeeze a generous line of glue approximately one inch below the rim around the inside circumference of the outer tube (the tube with the printed image and a hole in the base).

slide outer tube over inner tube

5. Line up the openings of both tubes and push the outer tube downwards slowly, to allow air to escape through the vent hole. Rotate as pushing.

cover air hole with label

6. Once the tubes are firmly in place, attach the label provided over the vent hole.

PLEASE NOTE – it is important to attach the label at this point in the assembly to prevent any leakage of cremains through the vent hole when the tube is returned to its upright position.

replace lid

7. Turn the sealed urn over and replace the lid ensuring that the image is aligned.

remove lid and push out perforated disc to scatter remains

8. To scatter cremated remains, remove the lid and push out the perforated disc.